China Hebei Fuluosi Building Materials Group Co., Ltd Company News

Many building materials, such as coated ceramic tiles, are commonly used in exterior walls of buildings. In response to these traditional building materials, Flores innovatively develops and produces soft porcelain flexible face tiles. What is the difference between them and ordinary bricks? Today, the editor will explain to you what Fulos soft porcelain flexible face tiles are, their advantages, and construction characteristics, so that you can have a comprehensive understanding.     From the literal meaning, it can be understood that external wall flexible tiles are ordinary tiles with a certain degree of flexibility. They are mainly made of colored inorganic mineral powder as the main raw material, added with certain modifiers, and formed by microwave baking. They are widely used, such as for the external walls of residential villas, shopping malls, office buildings, tourist attractions, schools, hospitals, and other areas where ordinary tiles are not good at, such as high-rise buildings, special-shaped buildings, etc For the renovation of old cities, flexible facing bricks on the exterior walls of Flores can also be used, and it is also one of its advantages.     Due to its lightweight, thin, and flexible characteristics, the flexible facing bricks on the exterior walls of Fulos are not easy to fall off after installation, making them safer. They are also easy to construct and reduce labor and other comprehensive costs. In irregular buildings, they can be pasted on the wall without the need for a cutting machine, without dust, noise, and other pollution. They are not as severely affected by the weather as coatings, and are more excellent in scenes such as renovation of old residential areas and school renovations. The flexible tiles on the exterior walls of Fulos have rich textures, including cave stone bricks, wave point bricks, kiln transformation bricks, relief rock cutting bricks, clay bricks, and other textures. In addition, there are a variety of designs and colors, totaling over 300, which are very outstanding in terms of aesthetics and practicality.

The integrated panel for exterior wall insulation and decoration has excellent insulation characteristics, and compared with traditional exterior wall insulation and decoration materials, it has cold resistance and insulation performance. It greatly reduces the energy consumption of heating and cooling, and saves energy expenditure. The product has a high cost-effectiveness and shows advantages in exterior wall insulation and decoration material products.   Comparison of thermal conductivity and material thickness to achieve equivalent insulation effect: The thermal conductivity of different materials varies depending on the selection of the insulation layer, resulting in different insulation effects. Insulation materials should be selected according to local climate conditions. The thermal conductivity is mainly related to the insulation core materials used: XPS extruded board ≤ 0.03W/M.K, EPS polystyrene board ≤ 0.039W/M.K, PF phenolic board ≤ 0.03W/M.K, PU polyurethane board ≤ 0.025W/M.K, RW rock wool ≤ 0.048W/M.K, graphite polystyrene board ≤ 0.033W/M.K, foam glass insulation board ≤ 0.06W/M.K.     Convenient installation and cost saving: The new type of board is lightweight, high-strength, and labor-saving in handling and installation. The installation method of using adhesive anchors is simple and fast, and is not limited by weather, seasonal climate, and geographical environment. It is suitable for all year round. Not only did it accelerate the project progress, but it also saved construction costs and reduced overall costs. The integrated panel for external wall insulation and decoration not only achieves insulation, fire prevention, and decoration effects, but also greatly reduces the load-bearing capacity of the external wall.   Lightweight, high-strength, shockproof, and crack resistant: The integrated panel for exterior wall insulation and decoration has light weight, high strength, and good impact resistance. Its lightweight advantage not only reduces the load-bearing capacity of the building itself, but also greatly reduces the impact of earthquakes on the building. The board is fixed inside the wall using adhesive anchors, with strong integrity, seismic resistance, crack resistance, and durability. Traditional waterproof and moisture-proof exterior wall decoration materials commonly suffer from substrate degradation caused by water and cold permeability, leading to problems such as indoor wall seepage. The excellent structure of the new board and the compact installation method between the boards avoid structural damage caused by rain, snow, freezing, thawing, dry and wet cycles. After installation, the worry of water seepage on the wall is eliminated, effectively avoiding the phenomenon of indoor wall mold. Even in severe cold areas, the stable performance of the new type of board has no worries about water seepage and deformation, extending the service life of the building.

Construction process and precautions for rock wool insulation and decoration integrated board. Rock wool insulation and decoration integrated board is a type of insulation and decoration integrated board using rock wool as insulation material. The insulation and decoration system placed on the surface of building walls has excellent insulation effect and long-term performance, with less thermal bridge effect and good energy-saving and insulation effect.   1. Grassroots inspection The cement mortar of the wall has a certain thickness, and the surface should be clean and free of dust, oil stains, and impurities such as moss. The surface layer shall be free from hollowing, sand formation, peeling, and ash explosion. The comprehensive specifications such as wall flatness, large angle perpendicularity, and window edge straightness meet the intermediate plastering standard. That is, use a 2m ruler to check the flatness of the wall, with an error of 4mm. The window sills, eaves, decorative lines, and parapet coping should have a slope. The wall is not elevated.   2. Basic wall treatment Check the condition of the original exterior wall tiles, chisel out the hollowed parts, and clean the wall with oxalic acid or other cleaning agents to ensure that the surface of the tiles is clean and free of stains. Fill the gaps in the wall holes with a special adhesive interface agent for painting, completely covering the brick wall surface and ensuring that the flatness meets the intermediate plastering standard.   3. Setting out the baseline The baseline is the initial construction line that serves as the starting point for construction in both vertical and horizontal directions after the start of construction, and maintains the relative position of the four walls as a standard line. The vertical reference line for general construction should be placed above the building, while the horizontal reference line for construction should be placed at the contour lines of the internal and external corners and at the characteristic contours. The reference line should be marked on the wall with ink lines, and each connecting construction surface should be marked with lines.     4. Cutting integrated board According to the design requirements and combined with the actual requirements of the construction site, cut the horizon board into the specified size, and the size and quantity of the insulation and decoration integrated board should be consistent with the layout. The position and number should be marked on the back of each board to ensure the accuracy of construction.     5. Configure dedicated adhesive Select a suitable container, first pour the bonding mortar into the container, then pour clean water, mix while pouring, and mix thoroughly. Adjust the amount of water added according to the temperature on site to ensure smooth scraping and coating. The bonding mortar should be mixed as needed, and the mixed bonding mortar should be used up within two hours.

Houses, like people, will gradually age over time. Nowadays, many cities are facing the renovation of old residential areas. Can flexible tiles be used for building renovation? Is its effect good, and what are the differences and advantages compared to other building materials?     Flexible ceramic tiles can meet the application requirements and decoration effects of different styles of construction, such as residential, commercial, and industrial buildings. Each tile is only 2-3mm thick and weighs only 3-3.5kg per square meter. The same unit area of decoration materials can reduce transportation energy consumption by up to 90%, bringing great benefits to developers. Moreover, soft porcelain has been praised multiple times in completed projects due to its advantages of energy conservation, emission reduction, rich performance, and aging resistance.   Flexible ceramic tiles are lightweight, flexible, and easy to construct, especially in the renovation of old walls or space innovation. They do not need to knock off the original old wall material and can be directly pasted onto them. Not only is there no noise or waste during construction, it does not disturb the people, and it does not damage the construction structure, greatly saving costs, shortening the construction period, and other advantages have continuously achieved success in old city renovation projects.